Page 115 - Webster Service Manual

110
TRANSFER PUMP UNITS
Transfer pumps/motors consist of an electric motor and
Webster fuel unit. Each W ebster fuel unit has been
designed for a variety of needs from fuel supply to fuel
transfer. With capacities ranging from 9 to 150 gph at
100
psi, Webster transfer units are capable of satisfying
virtually every system supply or transfer need.
SPECIFICATIONS
35223
Series, 35202 Series, 49116 Series
Capacities:
35223
Series—80 to 155 gph at 100 psi.
35202
Series—9 to 65 gph at 100 psi.
49116
Series—31 to 66 gph at 100 psi.
Maximum Working Pressure:
35223
Series—80 to 200 psi.
35202
Series—100 to 300 psi.
49116
Series—100 psi
Motors:
All motors 60 cycle, 1750 rpm, continuous duty 115 volt.
1/6
and 1/4 hp are split phase.
1/2
hp is capacitor start—induction run, TEFC with dual
115/230
volt windings.
Fuel Units
(
Close Coupled to Motor):
35223
Series uses Websters' B Series Fuel Oil Transfer
Units.
35202
Series uses Websters' V Series or R Series Fuel
Units.
49116
Series uses W ebsters' 1R00 Series Fuel
Transfer Units.
Mounting:
Maximum Inlet Vacuum:
Four bolt foot mount.
10”
Hg vacuum.
Use of external filter recommended.
35223
SERIES TRANSFER UNITS
The 35223 Series Pump/Motor Unit consists of a
Webster B Series fuel oil transfer pump close coupled
to a 1/4 hp electric motor. This unit is designed for trans-
fer of fuel oils #6 or lighter at maximum working pres-
sures up to 200 PSI depending on motor hp.