Previous Page  23 / 108 Next Page
Information
Show Menu
Previous Page 23 / 108 Next Page
Page Background

Compression Fittings

www.tribalmfg.com

|

23

Information

Tribal brass compression fittings are ideal for use with copper,

brass, aluminum or plastic tubing and are commonly used

on gasoline, grease, oil, water, vacuum and air lines. Tribal

compression fittings are not recomended for use with steel

tube. Tribal offers a wide variety of compression fittings

including our Ander-Lign/Poly® universal compression fittings

with brass inserts.

The Ander-Lign/Poly universal compression fittings is the only

brass compression fitting that can be used with almost any

type of tubing. The Ander-Lign/Poly universal compression

fittings come completely assembled with the brass insert and

captive sleeve. The bodies are interchangeable with standard

compression fittings. The Ander-Lign fitting puts 360° of even

pressure on the tubing, ensuring a tight seal.

Specifications

Temperature: -65°F to 250°F

Working Pressure: Temperature and type of tubing must be considered for proper fitting selection. The following is based on 70°F with

copper tube.

Installation Instructions

Cut tubing square on the end. Start tubing on the insert side

and slide into the fitting until it hits the stop. Wrench tighten

approximately 1-1/2 to 2 turns beyond hand tight.

Do not

over tighten.

Made in the USA.

COPPERTUBEO.D.

TUBEWALLINCHES PSE(ANDER-LIGN)

PSE(STANDARD)

1/8"

0.030

2800

400

3/16"

0.030

1900

400

1/4"

0.030

1400

300

5/16"

0.032

1200

300

3/8"

0.032

900

200

1/2"

0.032

700

200

5/8"

0.035

640

150

3/4"

0.035

550

100

7/8"

0.035

450

75

THREAD SIZES

FITTING

THREADSIZE

1/8"

5/16" X 24

3/16"

3/8" X 24

1/4"

7/16" X 24

5/16"

1/2" X 24

3/8"

9/16" X 24

7/16"

5/8" X 24

1/2"

11/16" X 20

5/8"

1-3/16" X 18

3/4"

1" X 18

7/8"

1-1/8" X 18

Tube

Tubing

Nut

Insert

Thread

Compression Body

Sleeve

Nut and Sleeve