Snap-on Industrial Brands - Tools at Height1 (1) - page 5

5
Any tool that weights more than 5 pounds should be attached to an anchor
point such as a work platform or utility bucket rather than the operator.
tools at height
WARNING
Tethers, Lanyards, and Carabiners
Stock Number
Size / Description
Extension
Length
Capacity
WTHCARA15
3
/
4
" Super Coil Personal Duty Tether w/ 2 SST Carabiners
42"
15#
WTHCARA25 **
1" Super Coil Anchor Nylon Tether w/ 2 SST Carabiners
10'
25#
WTHCARA30
30lb. Heavy Duty Lanyard with 2 Stainless Steel Carabiners
40"
30#
WTHL1
Snap-Hook Tether for Attachment to Safety Coils,
Key Rings, or Cable Loops
12"
5#
WTHL2
Universal Tether with One Snap Hook and One Adjustable Loop
12"
5#
WTHPRT
Pin Release Tool for Square Drive Tools
WTHTOOLPOUCH
Tool Pouch with Attachment Points
WTHUNI5
3
/
4
" Super Coil Personal Duty Tether w/1 SST
Carabiner & 1 Fixed Loop
46"
6#
WTHUNI12 **
1" Super Coil Anchor Tool Tether w/1 SST
Carabiner & 1 Fixed Loop
10'
12#
WTHUNI15
3
/
4
" Super Coil Personal Duty Tether w/1 SST Carabiner
& 1 Fixed Loop
46"
15#
WTHUNIRET1
Personal Duty Retractable Tether w/ Universal Attachment
36"
16 oz.
WTHUNIRET2
Personal Duty Retractable Tether w/ Universal Attachment
42"
32 oz.
WTHWS1
Adjustable Wrist Strap with Velcro Closure & D-Ring
WTHRET2CLIPS
For RT3 retractor
WTHRET1CLIPS
For RT4 retractor
WTHANCHOR
Anchor Strap
25#
WTHWSRET1
Personal Duty Retractable Tether w/ Universal Attachment
and Wrist Strap
36"
16 oz.
Snap-on Industrial Brands retention system increases safety and productivity wherever tools are used.
Attaching tools to a lanyard or tether can keep them from falling when used in high places, can help prevent
foreign material, and can reduce loss of valuable tools in environments like ocean platforms. Williams
tethers can be used on a wide range of hand tools and cordless power tools. Lanyards can be attached to
wrist, belt, harness or other location based on usage and weight. Be sure to use a lanyard with capacity that
exceeds the weight of the tool you are attaching because drop forces are often greater than the actual tool
weight.
Competitive
aluminum
carabiner
Williams stainless steel carabiner with
screwlocking
connector
All Retention Systems Are Not Created Equal
Snap-on Industrial Brands uses a stainless steel, screw-locking carabiner connector
while many competitors use aluminum connectors that are not load rated. Snap-on
Industrial Brands also gives you a nylon tether that has a spring inside to absorb
the shock of a dropped tool and built in drop indicator. Lanyards that have been
involved in a drop should be replaced.
The drop indicator identifies that
for you.
Drop indicator
Nylon tether
with spring
** Note: 1" Super Coils are designed to be attached to an anchor point such as a utility bucket or work
platform. Due to length and capacity we do not recommend attaching these to an individual.
WTHUNIRET1
WTHWSRET1
WTHUNI12
WTHCARA15
WTHTOOLPOUCH
THUNIRET2
WTHANCHOR
WTHCARA30
lany ards
WTHPRT
1,2,3,4 6,7,8,9,10,11,12,13,14,15,...64
Powered by FlippingBook