Page 8 - Metacaulk Firestopping Products

8
Electrical Outlet Boxes
Metacaulk
®
Fire-Rated Putty Sticks & Pads
Metacaulk
®
Putty Sticks
are used to seal around penetrating items through
fire-rated walls, floors and within blank openings. For use with electrical cables,
conduit and metal pipes. Hand moldable with no curing time required.Will not dry
out and can be re-used as additional penetrating items are removed or installed.
Easy to Install / Applied by Hand
No Asbestos Fillers
No Mixing
Adheres to all common
building surfaces
Metacaulk
®
Putty Pads
are used to maintain the hourly rating of fire-rated
walls containing electrical outlet boxes and to reduce sound transmission. Only
one pad thickness (1/8 inch) is required for a 1 or 2 hour fire rating. No additional
putty material needed to plug the end of each electrical metallic tube or conduit
at its connection to the box. Hand moldable with no curing time required. STC
rating 60, Tested in a UL 411 wall assembly/section to ASTM E90.
Code
Description
Quantity
per Case
66345 18
cubic inches
12
Code
Description
Quantity
per Case
66340 6”
x 7” x
1
/
8
thick
20
66335 7”
x 7”x
1
/
8
thick
20
Metacaulk
®
Cover Guard™
Metacaulk
®
Cover Guard™
is a single component, fire-rated gasket for use with
electrical boxes to comply with the “24 inch rule”.
Metacaulk
®
Cover Guard™
fits
under the cover plate and does not take up volume in the electrical box. It is a labor
saving replacement for putty pads in normal applications. STC 54 rating, Tested in
a UL 411 wall assembly/section to ASTM E90. Patent #6,207,085; 6,252,167.
Easy to install - Cost effective
UL Classified as a Wall Opening
Protective Material
Great for retrofit applications
Reduces sound transmission
Code
Description
Quantity
per Case
66270
Double Receptacle
50
66272
Single Receptacle
50
66274
Double Switch
50
66276
Single Switch
50
66266
Double Decor
50
66265
Single Decor
50
Metacaulk
®
Box Guard™
Metacaulk
®
Box Guard™
is a
highly intumescent, fire-rated pad
for use in electrical boxes. When
complying with the “24 inch rule”, it
is inserted on the inside back wall
of an electrical box. When exposed
to fire,
Box Guard™
will expand
forming a char that will seal off the
opening and prevent the spread of
flames and limit the temperature
rise on the unexposed surfaces. A
labor saving, economical alternative
to putty pads. Great for retrofit jobs.
STC 53 Rating, Tested in a UL 411
wall assembly/section to ASTM E90.
Patent #6,207,085; 6,252,167.
Code
Description
Quantity
per Case
66366
Single Box
50
66367
Double Box
50
66369 4
11
/
16
x 4
11
/
16
50
Easy to install
w/ Self-adhesive strip
Cost effective
UL Classified as a Wall
Opening Protective Material
Highly intumescent
Non-conductive
Dielectric breakdown voltage
22
V/mil (ASTM D 149)