Page 10 - Metacaulk Firestopping Products

10
Other Products
Metacaulk
®
Joint Strip
is a flexible, highly intumescent firestop material used in
concrete and masonry floor and wall joints up to 1” wide. It forms a strong insulating char
that prevents the passage of flame, smoke and hot gases between joints.
Metacaulk
®
Joint Strip
is ideal for stadium construction, tilt up panels, curtain wall panels and all
concrete and masonry wall and floor construction joint applications where a fire-rated
joint is required.
No firestop caulk required
Simple & Easy
Single sided application
Saves labor & materials
Metacaulk
®
Firestopping Joint Strip
Code
Description
Quantity
per Case
50250 5
Gallon
1
Metacaulk
®
Industrial Cable Coating
Metacaulk
®
Industrial Cable Coating
is a heavy duty intumescent coating
used to prevent flame spread on power and communication cables.
Industrial
Cable Coating
is designed to resist the spread of fire along the cable jacketing
and to extend the circuit integrity of the electrical cables during a fire. It has a low
odor, and is compatible with and adheres to typical cable jacketing materials. It
can be used for both indoor and outdoor applications, applied using a paintbrush
or an airless spray equipment and able to be easily applied to both vertical and
horizontal surfaces.
Intumescent & Flexible
No cable derating
Low odor
Safe & Easy to use
Interior & Exterior use
Water resistant
Metacaulk
®
Wrap Strip
is a flexible strip of highly intumescent firestop material
used primarily for plastic and insulated pipe applications. When exposed to heat,
it expands and forms a strong char to seal off the penetration and prevent the
passage of flames and hot gases. Easy to apply - simply wrap required number of
strips around penetrating item and push into annular space. May also be used with
a universal collar. Patent #6,207,085.
• 25%
reduction of installation time
Easy to apply
Systems up to 14” PVC
Easy dispensing carton
No cure time
Code
Description
Quantity
per Case
66135 1”
x 12’ Strip
6
66136 2”
x 12’ Strip
4
Metacaulk
®
Firestopping Wrap Strip
*
FBC™ System Compatible** indicates that this product has been tested, and is monitored on an ongoing basis, to assure its chemical compatibility with FlowGuard Gold®, BlazeMaster® and Corzan® pipe and fittings.
**
FBC
™,
FlowGuard Gold®, BlazeMaster® and Corzan® are licensed trademarks of the Lubrizol Corporation.
Code
Description
Quantity
per Case
66700 1/16”
x 1” x 82’
6
66701 1/16”
x 1.5” x 82’
4
66704 1/16”
x 2” x 82’
3
66702 1/16”
x 2.5” x 82’
2
66703 1/16”
x 2” x 82’
2