Previous Page  33 / 132 Next Page
Information
Show Menu
Previous Page 33 / 132 Next Page
Page Background

Catalog

Net Wt.

Net Wt.

Number

Description

oz. (g)

lbs. (kg)

C5A

Turbo Crimper Drill Attachment

4.9 (2.22)

Replacement Parts

TSDC

TurboShear Drill Clamp

8 (227)

TSCG

TurboShear Chuck Guard

.96 (27)

Catalog

Net Wt.

Number

Description

lbs. (kg)

C5A2

Turbo Crimper Impact Driver Attachment

3 (1.36)

TurboCrimper

TurboCrimper

Impact

Get the competitive edge with a labor-saving,

cost-saving TurboCrimper impact driver

attachment.

78% faster than hand tools!

It also eliminates the need for costly couplings.

The drive shaft of the CR Crimping Attachment inserts into the chuck of a min-

imum 14.4Volt cordless or maximum 7 Amp A/C drill. A compact, telescoping

clamp adjusts to fit both length and width of any size drill housing. The

installed CrimperTurboXTool is easily operated with one hand. Set the drill at

low forward drilling speed. A 9:1 gear reduction ensures safety and control.

Use your existing drill to save time and effort

crimping 24 to 30 ga. (0.71 to 0.41 mm)

galvanized steel duct, spiral duct, aluminum pipe

or (0.61 to 0.31 mm) black stove pipe!

The Fastest, Easiest way to Crimp Round Duct!

Drill Not Included. • Patented

360° Rotating Collar will not fit on this model.

Drill should be set to (Low forward drilling speed).

This tool has been engineered to be

lightweight, durable, and extremely fast.

Attaches to your impact driver.

Drill Requirements:

3/8 in. (9.53 mm) Chuck,

Min. 14.4V - DC, Max 7A-AC

United States: 320-274-7387 • 800-328-3530 | Canada: 320-274-2376 • 800-219-1085 | International: 01-320-274-2376

33

Power Assisted Crimpers

Use the crimper depth adjustment lever, in the down position, to open gears for easy insertion and

removal of metal. The narrow point of entry in the face of the tool prevents fingers from entering

the gears that produce the crimp. • Start the crimp to the left of the duct or pipe lock-seam. With

the lever in the up position, the maximum crimping depth is factory set for optimal results in 26 to

28 gauge (0.56 to 0.48 mm) galvanized steel. Back off the lever for lighter metals or re-adjust the

maximum crimp, per operators manual, for heavier metals. A clutch in the gear mechanism prevents

damage to the crimper attachment if seams are encountered that exceed crimper capacity.

The rotation of the

meshing teeth on the

adjacent gears drives the

metal out the right side

of the tool head. Use the

throat depth line as a

guide to control the

length of the crimp.

C5A

C5A2

Material

Galvanized Steel 30-22 Gauge

inches (mm) 0.016 - 0.034 (0.41-0.86)

Material

Galvanized Steel 30-24 Gauge

inches (mm) 0.016 - 0.028 (0.41-0.71)

Metal Capacities

Metal Capacities

Metal Crimper - 24-30 ga.

Metal Crimper - 24-30 ga.

Coming

Soon!