Malco Products Inc. Est. 1950
Actual Size of Weave
Creates a bite on metal surface for solder or paint. Aluminum oxide cutting
grain rates 9.2 on MO scale (diamond=10). Flexible cloth back fits contours
of any surface configuration and hard to reach areas. Long lasting urea resin
bonding is water resistant.
The FST tool straightens commonplace 8, 10, 12 or 14 fins per inch. Use
the FST2 tool for straightening closely spaced 16, 18, 20 or 22 fins per
inch. Both tools feature one-piece adjustable combs. The resilient nylon
comb material will not damage the soft aluminum fins of condenser or
evaporator units. Malco fin tools function by either pushing or pulling
and efficiently straighten fins in tight quarters or where multiple passes
over bent fins are required. Comfortable offset handles provide a sure
grip and protect knuckles from scraping.
These budget priced tools are for bending soft tubing to any shape
without collapsing walls. The special spring steel is zinc finished.
One end is flared for quick tube insertion and removal.
The 5 convenient sizes can be used economically for many jobs.
requires only light pressure, lasts twice as long as cloth.
Scrim is nylon weave. Waterproof adhesive bonding.
Will not clog, load or break down.
Abrasive cloth specifically designed for cleaning
and preparing solder joint fittings
Closed coat, 120 grit
Fin straightening tools with adjustable nylon combs
Versatile and economical spring-style tube benders
180 grit open mesh cleans with both sides,
Tubing Outside Diameter in. (mm)
1-1/2” x 10 yd. (38.1 mm x 9.14 m) brown roll
1-1/2” x 5 yd. (38.1 mm x 4.57 m) mesh roll
Fin Straightening tool for 8, 10, 12 or 14 fins per inch
Fin Straightening tool for 16, 18, 20 or 22 fins per inch
Tube Bender Kit
(*SEE NOTE ABOVE)
* No. TB102K Tube Bender Kit is a 5 piece set including shown
Tube Benders above plus 1/4” (6.4 mm) size.