Background Image
Previous Page  60 / 124 Next Page
Information
Show Menu
Previous Page 60 / 124 Next Page
Page Background

Visit our website:

www.henrytech.com

COMPRESSOR PROTECTIVE DEVICES

OIL LEVEL COMPONENTS

Universal Adaptor Kits and Valves

UNIVERSAL ADAPTER KITS

SHUT-OFF BRASS VALVES

Applications

Henry Technologies offers a number of universal Equalization and Extension

Adapter Kits for use in applications where Standard Adapter Kits will not

work. The Equalization Adapter Kits include SAE flare fittings to allow non-

equalized Oil Level Regulators to be interconnected (equalized). Extension

Adapters are available if extra clearance is needed between the Oil Level

Regulator and Compressor. All Universal Adapter Kits are suitable for use

with HFC and HCFC refrigerants and their associated oils, as well as other

industrial fluids non-corrosive to steel, copper, and synthetic rubber.

Technical Specifications

Maximum working pressure = 450 PSI (31 Bar)

Allowable operating temperature = 14°F to +212°F (-10°C to +100°C)

Materials of Construction

All adapters are made from carbon steel. The O-Rings are made of

Neoprene and hardware is made from Grade 5 Steel.

Installation - Notes

1. Do NOT operate ANY Oil Level Regulator at 1/4 sight glass when using

an adapter with an inside diameter smaller than the Oil Level Regulator

flange port.

2. Oil Level Regulator installation should follow requirements of compressor

manufacturers where applicable.

3. Full Instructions are provided in the Product Instruction Sheet included

with each Adapter Kit.

Part No Description Fig

No

Dimensions (inch)

A B C D E F G

3-033-226 Equalization

1 0.777 0.524 0.937 1.38 3.22 1.31 N/A

3-033-221 Double 1/4 SAE

Flare Equalization 2 0.777 0.524 0.937 1.38 3.22 2.00 1.31

3-033-227 Double 3/8 SAE

Flare Equalization 2 0.777 0.524 0.937 1.75 3.23 2.00 1.31

3-033-212 Short Extension 3 0.777 0.524 0.937 N/A 2.59 N/A N/A

3-033-254 Long Extension 3 0.777 0.524 0.937 N/A 3.25 N/A N/A

3-033-217 Universal Adapter 4 0.777 0.524 0.937 1.25 1.91 N/A N/A

Applications

Henry Technologies' Brass Shut-off Valves are offered in vertical and

horizontal configurations. Both configurations are designed to mount on oil

inlet connections and equalization line connections of Oil Level Regulators

and Oil Separator return fittings. The valves allow each Oil Level Regulator

to be isolated if service is required on a Compressor, Oil Level Regulator, Oil

Filter, Oil Filter-Drier, or Oil Strainer. The inlet of each valve has a female

swivel SAE flare connection which allows 360° positioning of the male SAE

flare connection for most convenient mounting of oil or equalization lines.

Henry Technologies' Brass Shut-off Valves are suitable for use with HFC and

HCFC refrigerants and their associated oils, as well as other industrial fluids

non-corrosive to steel, brass, copper and nylon.

Technical Specifications

Maximum working pressure = 450 PSI (31 Bar)

Allowable operating temperature = 14°F to +212°F (-10°C to +100°C)

Materials of Construction

The valve body is made of brass. The stem is made from steel. The swivel

connection is made from brass and copper and the seal cap is made from

brass.

Part No Fig

No

Dimensions (inch)

Weight (lbs)

A

B

C

S-9106V 1

3.55

1.25

1.25

0.45

S-9106H 2

3.55

1.25

1.25

0.45

FIG 1

C

B

E

A A

D

1

C

B

A A

D

1

FIG 2

F

2

G

F

E

2

C

B

A A

1

E

FIG 3

FIG 4

D

E

A A

C

B

B

A

C

1

2

Œ

3/8 SAE Flare Swivel Inlet



3/8 SAE Flare Outlet

A

B

C

2

1

FIG 2

FIG 1

Œ

3/8 SAE Flare Swivel Inlet



3/8 SAE Flare Outlet

Œ

3 Bolt 1-7/8” BC

Œ

3 Bolt 1-7/8” BC



SAE Flare Fitting

Œ

3 Bolt 1-7/8” BC



SAE Flare Fitting

1

Œ

3 Bolt 1-7/8” BC

60