Previous Page  32 / 36 Next Page
Information
Show Menu
Previous Page 32 / 36 Next Page
Page Background

32

REMS Picus SR Basic-Pack.

Electric diamond core drilling machine with speed regu-

lation. For core drilling in steel-reinforced concrete up to Ø 162 mm (6.38"), masonry

up to Ø 250 mm (10"). For dry or wet drilling, hand held or with drill stand. Drive

machine with drilling crown connection thread UNC 1

1

/

4

male, BSPP

1

/

2

female, main-

tenance-free 2-step gear with safety slip clutch, universal motor 110 V, 50–60 Hz,

2200 W (3 HP). Stepless electronic speed regulation 200 rpm to 500 rpm (1

st

gear) or

500 rpm to 1200 rpm (2

nd

gear), overheating protection. Multifunction electronics with

soft starting, idle speed limiting, overload protection, blocking protection. Touch switch

with lock. Personal protection switch (PRCD). Water supply device with adjustable

shut-off valve and quick coupling with water stop and ½" hose connection. Stabiliser.

Spacer set. Single open ended wrench size 32. In sturdy steel case.

Art.-No. 183010

REMS Picus S3 Basic-Pack.

Electric diamond core drilling machine for core drilling

in steel-reinforced concrete up to Ø 152 mm (6"), masonry up to Ø 250 mm (10"). For

dry and wet drilling, hand held or with drill stand. Drive machine with drilling crown con-

nection thread UNC 1

1

/

4

male, BSPP

1

/

2

female, maintenance-free 3-speed with safety

slip clutch, universal motor 110 V, 50–60 Hz, 2200 W (3 HP), multifunction electronics,

touch switch with lock, personal protection switch (PRCD). Load speed drilling spindle

530 rpm, 1280 rpm, 1780 rpm. Water supply with shutoff valve, quick-coupling with

water stop and hose connection

1

/

2

". Stabiliser. Single open-ended wrench size 32.

In sturdy steel case.

Art.-No. 180011

REMS Simplex 2.

Robust, handy drilling stand for core drilling up to Ø 200 mm. Drill

column made of rigid, unbendable square precision steel tube Ø 50 mm, with extra

narrow tolerance, for low-vibration guiding of the slide. Drilling column guided in sturdy

stand and double bolted for high rigidity during drilling. Steel section stand. 4 Set screws

for levelling unevenness of the floor, for exact standing position. Clamping bracket

for holding drive machines with clamping throat Ø 60 mm. Slide guided on all sides by

adjustable, pretensioned plastic slide bearings. Precision in-feed drive ensures easy,

low-vibration drilling and precise, low-vibration drill thrust. For high thrust pressure and

long life of the drilling crowns. Spirit level integrated in the slide for exact alignment of

the drill stand. Locking of the slide for simple assembly of the drilling crown and safe

transport. Stable clamping bracket, unbendable and rigid, for accommodating drive

units with Ø 60 mm clamping throat. Rack and pinion force transmission with ergono-

mically designed pressing lever which can be inserted in both sides of the slide. Wide

steel rack. Weight 12 kg (26 lbs). With tools, consisting of Allen key size 6, single open

ended wrench size SW 19 and SW 30 and fastening kit for masonry and concrete,

consisting of 2 M12 splaying anchors, 10 M12 hammer anchors for concrete, setting

iron for M12 hammer anchors, cord threaded bar M12 × 65, quick clamping nut, washer

in box. For REMS Picus S1, REMS Picus S3, REMS Picus SR and other makes.

Art.-No. 183700

REMS Titan.

Robust, highly stable drilling stand for core drilling in steel-reinforced

concrete and other materials up to Ø 300 mm. For high demands. Drill column made of

rigid, unbendable square precision steel tube Ø 50 mm, with extra narrow tolerance, for

low-vibration guiding of the slide. Continuously tiltable with degree scale up to 45°, with

double support by adjustable, single-part steel girders, for maximum thrust pressure.

Highly stable, 3-sided guidance of the drill column in the base plate and triple cross

fastening for high rigidity in vertical drilling. 4 Eyebolts for levelling unevenness of

the floor, for exact standing position. Drill depth scale. Slide guided on all sides by

adjustable, pretensioned plastic slide bearings. Precision in-feed drive ensures easy,

low-vibration drilling and precise, low-vibration drill thrust. For high thrust pressure and

long life of the drilling crowns. Spirit level integrated in the slide for exact alignment

of the drill stand. Locking of the slide for simple assembly of the drilling crown and

safe transport. Rigid connection plate made of wear-resistant spheroidal iron. Quick-

clamping device for accommodating drive units with a suitable connection plate. Highly

stable clamping bracket, unbendable and rigid, for accommodating drive units with

Ø 60 mm clamping throat. Rack and pinion force transmission with ergonomically

designed pressing lever which can be inserted in both sides of the slide. Wide steel

rack. Base plate with groove for sealing ring of the vacuum fastening. Vacuum fastening

as accessory. Drill column with adjustable clamping head for clamping the drill stand

between the ceiling and floor or between two walls. Mobile drill stand for easy transport

Weight 19.5 kg (43 lbs). With tools, consisting of Allen key size 6, single open ended

wrench size SW 19 and SW 30 and fastening kit for masonry and concrete, consisting

of 2 M12 splaying anchors, 10 M12 hammer anchors for concrete, setting iron for M12

hammer anchors, cord threaded bar M12 × 65, quick clamping nut, washer in box.

System advantage: For REMS Picus S1, REMS Picus S3, REMS Picus SR,

REMS Picus S2/3,5 and other makes. Use spacer set (see below) when using

with REMS Picus SR.

Art.-No. 183600

German Quality Product

German Quality Product

German Quality

Product

Spacer set

, for additional fastening of the REMS Picus SR drive

machine to the REMS Titan drilling stand, consisting of spacer and

two M 8 x 65 cylinder head screws

Art.-No. 183632